High-Performance Spray Heads
The B-SAFETY high performance spray heads not only meet the requirements of DIN EN 15154-
2:2006 and ANSI Z358.1-2009 but also ensure that the water is distributed over a large area. This also
takes care of the regions around the eyes and eyes can be positioned in the water jet without problems.
The restricted, even and, most important of all, soft water jet has been optimized for rinsing
chemicals out of the eye.
Dust Caps
The protective dust caps open automatically through the water pressure when operating the eye wash.
Rubber Sleeves
The rubber sleeves around the spray head protect those seeking help from injuries caused by impact.
Large Bore Holes in the Spray Heads
The large bore holes in the spray heads prevent calcification.
Special Ball Valves for Eye Showers
All ball valves used in the device are completely made from stainless steel AISI 316 and are extremely
robust. Proper functionality is guaranteed after more than 50,000 applications.
Integrated automatic Flow Regulator
The unique automatic flow regulators of B-SAFETY ensure the correct jet height and a standard-compliant
spray pattern is attained independent of water pressure. Depending on the model, the flow volume
rate is 7, 14, or 16 litres per minute.
High-Quality Materials
B-SAFETY only uses high-quality materials for the production of eye washes: Stainless steel, brass
and special plastics with a certified permit for drinking water applications.
Robust Construction
A robust and sophisticated design suitable for harsh industrial environments is the norm for the
B-SAFETY eyewashes.
Chemical resistant Polyester Powder Coating of green variants (085)
The green B-SAFETY polyester powder coating has stood the test of time in many aggressive environments
and is resistant to many acids and alkalis.